#Crear unidad de recuperacion iso

Rubber is naturally aging which means that the material degrades over time. Rotation of stockĪpply FIFO (First In First Out) so that remaining items in stock are those of most recent delivery.

In addition, the product must also be protected from ionizing radiation. Ozone and radiation: Ozone is particularly harmful to rubber, therefore avoid storing rubber in the same room as equipment capable of generating ozone, such as mercury vapour lamps or high-voltage electrical equipment. Light: Store preferably dark or avoid direct sunlight or artificial light having a high ultra-violet content. Very moist or very dry conditions should be avoided. Humidity: The relative humidity should be below 65 % and condensation should not occur.

If suction cups are taken from low temperature storage the temperature should be raised to ambient temperature. Temperature: The products should preferable be stored between 15 ☌ to 25 ☌. Products shall be stored in a relaxed condition, free from superimposed tensions and compressive stresses etc. However, if not acceptable wash with water and a mild detergent. The function of the rubber is not affected, and it is therefore not considered a defect. 'Bloom' refers to a whitish layer on the surface of the rubber products, which is entirely normal and acts as a protection. Cleaningįor cleaning, use a mild detergent and lukewarm water. Wear gloves and clean the products before putting them into operation.

#Crear unidad de recuperacion iso

For most parts the guidelines are based on ISO 2230.įor sensitive applications, avoid contact with dirt or grease. Other conditions may increase the risk of premature deterioration like excess hardening, softening, permanent deformation or other surface damage. By applying these guidelines, the durability and properties of the suction cups or rubber products will be optimized for a long lifetime.

The following guidelines specify suitable conditions for handling and storage of suction cups and other rubber products.